NI InstrumentStudio用户使用手册.pdf
《NI InstrumentStudio用户使用手册.pdf》由会员分享,可在线阅读,更多相关《NI InstrumentStudio用户使用手册.pdf(88页珍藏版)》请在咨信网上搜索。
1、Instr umentstudio Featur es2023-03-01Instrumentstudio FeaturesContentsInstrumentstudio Manual.4New Features.4Supported Hardware.9Configuring Panels and Layout.14Creating a Layout.15Configuring Panels with the Instrument Header Menu.17Relinking or Replacing Missing Devices.18Multi-Device Synchronizat
2、ion.20Remote RF Signal Analyzer Panel.22Configuring Device Settings.24Exporting a Device Configuration.24Exporting Configurations to Teststand.25Configuring Digital Multimeters.27Configuring LCR Devices.29Configuring Oscilloscopes.37Configuring RF Signal Analyzers.55Configuring RF Signal Generators.
3、59Configuring SMU and VPS Devices.64Configuring Waveform Generators.71Capturing Data.76Debugging Programmatic Applications.77Entering Debug Mode.78Enabling Debugging with a C,C+,or.NET Application.79Monitoring and Controlling Devices Used in an External Session.80Live Measurement View.81Disabling De
4、bugging.81Instrumentstudio Plugins.82Pin Maps.83Setting an Active Project Pin Map.83Selecting a Default Pin Map.84Creating a New Pin Map.84Adding Pin Map Files to a Project.85Editing a Pin Map.85/Instrumentstudio FeaturesUsing the Site Filter.85Pin Map Errors and Warnings.87Enabling Preview Features
5、.88 National InstrumentsInstrumentstudio FeaturesInstrumentstudio ManualThe Instrumentstudio manual contains information on navigating,configuring,and using Instrumentstudio.In addition,the manual contains reference material describing concepts that you may need when using devices with Instrumentstu
6、dio.To learn more about what you can accomplish with Instrumentstudio and National Instruments devices,referto FeaturesThe following sections describe new features added to each release of Instrumentstudio.2023 QIJanuary 2023 Added SMU measurement auto-range support for PXIe-4190 and PXIe-4190(500 k
7、Hz).Added LCR Meter impedance measurement auto-range support in sweep mode.Added remote RF Signal Analyzer panel viewing as a preview feature.Note Preview features have limited functionality and are not fully supported.Related information:SMU Measurement Autorange Enabling Preview Features Remote RF
8、 Signal Analyzer Panel2022 Q4October 20224 Instrumentstudio Features Added oscilloscope Manual Override mode,enabling simultaneous manual configuration of Record length and Sample Size in oscilloscope settings.Related information:Setting Sample Rate and Record Length Manually2022 Q3July 2022 SMU mea
9、surement auto-range support for DC Power devices that support it.Single-channel sweep mode support for PXIe-4190 when used in LCR mode.LCR Meter mode usability improvements for PXIe-4190.RF Signal Analyzer instrument with support for RFmx personalities.Related information:SMU Measurement Autorange S
10、MU/VPS Modes of Operation Analyzing RF Signals with an RF Signal Analyzer2022 Q2April 2022 Single-channel sweep mode measurement added as a preview feature for PXIe-4190 when used in LCR mode.2022 QIJanuary 2022 LCR panel debug monitor functionality and usability improvements for the LCR PXIe-4190 m
11、odule.Custom gating support for Scope measurements.Related information:National InstrumentsInstrumentstudio Features Customizing Oscilloscope Measurements2021 Q4October 2021 Added new LCR panel supporting interactive use with the PXIe-4190 module.Added access and visibility to pin maps.Improved UI r
12、esponsiveness and added pin filtering for systems with high channel counts.Related information:SMU/VPS Modes of Operation Setting an Active Project Pin Map2021April 2021 Added new RFSG Signal Generator panel supporting interactive use and debugging using PXIe-5820,PXIe-5830,PXIe-5831,PXIe-5832,PXIe-
13、5840,and PXIe-5841.Added support for the PXIe-4135(40W)and PXIe-4137(40W)source measure unit,newly supported in NI-DCPOWER 20.7.Related information:Generating RF Signals with an RF Signal Generator2020November 2020 Added support for the PXIe-4139(40W)source measure unit,newly supported in NI-DCPower
14、 20.5.Added support for multichannel session in the SMU/Power Supply panel,newly supported in NI-DCPower 20.6.Initializing an NI-DCPower session with 6 Instrumentstudio Featuresindependent channels allows you to use multiple instruments in the same session.With independent channels,you can configure
15、 multiple channels of the same instrument,or of multiple instruments independent of one another within the same session.Added support for monitoring merged channels in debug mode on the PXIe-4147.Merged channels are newly supported in NI-DCPower 20.6.Merging channels of an Nl SMU allows you to use m
16、ultiple channels in unison to increase the current you can source beyond the normal maximum for a single SMU channel.Related information:NI-DCPowe门ndependent Channel Sessions2019 SP1May 2020 Added support for the PXIe-4147 source measure unit,newly supported in NI-DCPower 20.0.2019September 2019 Mul
17、tiple NI-SCOPE devices of the same model can now be synchronized in the same oscilloscope panel.Added support for selecting trigger sources and events from other Nl devices in your system.Added waveform graphing,pulse current,pulse voltage,voltage sequence,and current sequence modes to SMU panels,in
18、cluding automatic hardware synchronization across multiple devices.Added asymmetric limits and software-protected ranges to SMU/Power Supply panels.Added NI-DCPower SourceAdapt configuration to SMU panels,useful for transient measurements.National InstrumentsInstrumentstudio Features Added channel v
19、iews to hide idle channels,show power calculations,and condense channel views to the SMU/Power Supply panels.Added inductance and capacitance measurements along with open and short cable compensation to digital multimeter(DMM)panels.Added the ability to generate waveforms from binary files to the wa
20、veform generator panel.Added debugging and monitoring support to the waveform generator panel.Added exporting configuration files from the waveform generator panel for use with the NI-FGEN driver.Added capability to export device configurations to Test Stand for use in test step configuration.Added
21、ability to use pin maps created in Digital Pattern Editor to group devices and channels by site and use pin names for channel aliases.Related information:SMU/VPS Modes of Operation Configuring SourceAdapt Parameters to Measure Transients Performing Cable Compensation Generating Waveforms with a Wave
22、form Generator Exporting a Device Configuration Exporting Configurations to Teststand Pin Maps2018 SP2January 2019 Added support for the PXIe-5163 oscilloscope,newly supported in NI-SCOPE 18.7.Added CSV file format for data capture.Added support for exporting instrument events to PXI chassis trigger
23、 lines.Added support for arbitrary waveform generation mode to the Waveform Generator panels.8 Instrumentstudio Features Added support for frequency list and sweep modes to the Waveform Generator panels.Added FFT channels,frequency markers,and FFT channel measurements to the Oscilloscope panels.Adde
24、d additional 2-channel measurements to the Oscilloscope panels.Related information:Capturing Data Waveform Modes Adding FFT Channels and Markers2018 SP1September 2018 Added support for the PXIe-5110,PXIe-5111,and PXIe-5113 oscilloscopes,newly supported in NI-SCOPE 18.6.2018May 2018 This was the init
25、ial release of Instrumentstudio.Supported HardwareThe following tables list hardware that can be used with Instrumentstudio,and the first available version of Instrumentstudio to support the hardware.NI-DCPowerThe following NI-DCPower hardware can be used with a SMU/Power Supply instrument in Instru
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- NI InstrumentStudio用户使用手册 InstrumentStudio 用户 使用手册
1、咨信平台为文档C2C交易模式,即用户上传的文档直接被用户下载,收益归上传人(含作者)所有;本站仅是提供信息存储空间和展示预览,仅对用户上传内容的表现方式做保护处理,对上载内容不做任何修改或编辑。所展示的作品文档包括内容和图片全部来源于网络用户和作者上传投稿,我们不确定上传用户享有完全著作权,根据《信息网络传播权保护条例》,如果侵犯了您的版权、权益或隐私,请联系我们,核实后会尽快下架及时删除,并可随时和客服了解处理情况,尊重保护知识产权我们共同努力。
2、文档的总页数、文档格式和文档大小以系统显示为准(内容中显示的页数不一定正确),网站客服只以系统显示的页数、文件格式、文档大小作为仲裁依据,平台无法对文档的真实性、完整性、权威性、准确性、专业性及其观点立场做任何保证或承诺,下载前须认真查看,确认无误后再购买,务必慎重购买;若有违法违纪将进行移交司法处理,若涉侵权平台将进行基本处罚并下架。
3、本站所有内容均由用户上传,付费前请自行鉴别,如您付费,意味着您已接受本站规则且自行承担风险,本站不进行额外附加服务,虚拟产品一经售出概不退款(未进行购买下载可退充值款),文档一经付费(服务费)、不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
4、如你看到网页展示的文档有www.zixin.com.cn水印,是因预览和防盗链等技术需要对页面进行转换压缩成图而已,我们并不对上传的文档进行任何编辑或修改,文档下载后都不会有水印标识(原文档上传前个别存留的除外),下载后原文更清晰;试题试卷类文档,如果标题没有明确说明有答案则都视为没有答案,请知晓;PPT和DOC文档可被视为“模板”,允许上传人保留章节、目录结构的情况下删减部份的内容;PDF文档不管是原文档转换或图片扫描而得,本站不作要求视为允许,下载前自行私信或留言给上传者【曲****】。
5、本文档所展示的图片、画像、字体、音乐的版权可能需版权方额外授权,请谨慎使用;网站提供的党政主题相关内容(国旗、国徽、党徽--等)目的在于配合国家政策宣传,仅限个人学习分享使用,禁止用于任何广告和商用目的。
6、文档遇到问题,请及时私信或留言给本站上传会员【曲****】,需本站解决可联系【 微信客服】、【 QQ客服】,若有其他问题请点击或扫码反馈【 服务填表】;文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“【 版权申诉】”(推荐),意见反馈和侵权处理邮箱:1219186828@qq.com;也可以拔打客服电话:4008-655-100;投诉/维权电话:4009-655-100。