华为软件概要设计模板.doc
《华为软件概要设计模板.doc》由会员分享,可在线阅读,更多相关《华为软件概要设计模板.doc(17页珍藏版)》请在咨信网上搜索。
1、XX High Level Design SpecificationXX 概要设计说明书Please input confidentiality level 请输入密级产品名称Product name密级Confidentiality level产品版本Product versionTotal 17pages 共17页XX High Level Design SpecificationXX 概要设计说明书Prepared by 拟制Name+ID姓名+工号Date日期yyyy-mm-ddReviewed by 评审人Date日期yyyy-mm-ddApproved by批准Date日期yyyy
2、-mm-ddXXXX Co., Ltd. XXXX有限公司 Revision Record 修订记录Date日期Revision Version修订版本CR ID / Defect IDCR号Sec No. 修改章节Change Description修改描述Author作者Catalog 目 录1Introduction 简介61.1Purpose 目的61.2Scope 范围61.2.1Name 软件名称61.2.2Functions 软件功能61.2.3Applications软件应用62High Level Design概要设计62.1Level 0 Design Descriptio
3、n第零层设计描述62.1.1Software System Context Definition 软件系统上下文定义62.1.2Design Considerations (Optional)设计思路(可选)72.2Level 1 Design Description第一层设计描述82.2.1Decomposition Description分解描述82.2.2Dependency Description依赖性描述92.2.3Interface Description接口描述102.3Level 2 Design Description (Optional)第二层设计描述(可选)122.3.1
4、Module name (1) 模块1名称122.3.2Module name (2) 模块2名称132.4Configuration and Control (Optional)配置和控制(可选)142.4.1Startup 启动142.4.2Closing 关闭142.4.3Creating MIB Table Item MIB表项的创建142.4.4Deleting MIB Table Item MIB表项的删除142.4.5Modifying MIB Table Item MIB表项的更改142.5Database (Optional)数据库(可选)142.5.1Entity, Att
5、ributes and their relationships 实体、属性及它们之间的关系142.5.2E-R diagram 实体关系 图14Table List 表目录Table1*表错误!未定义书签。表1*表错误!未定义书签。Figure List 图目录Figure 1*图错误!未定义书签。图 1*图错误!未定义书签。XX High Level Design SpecificationXX 概要设计说明书Keywords 关键词:Abstract 摘 要:List of abbreviations 缩略语清单: Abbreviations缩略语Full spelling 英文全名Chi
6、nese explanation 中文解释1 Introduction 简介1.1 Purpose 目的This section should state the purpose of the document. It could also specify the intended audience. 这部分要描述文档的目的。应该指明读者。1.2 Scope 范围1.2.1 Name 软件名称Identify the software by name对软件命名1.2.2 Functions 软件功能Explain what the software product(s) will and wi
7、ll not do (either directly or by reference to another software document).解释软件产品将完成或不完成的功能(可以直接描述也可以参考相关文档)1.2.3 Applications软件应用Describe the application of the product (either directly or by reference to another software document)描述软件的应用(可直接描述也可以参考其它软件文档)2 High Level Design概要设计 2.1 Level 0 Design De
8、scription第零层设计描述2.1.1 Software System Context Definition 软件系统上下文定义Describes the network organizing mode of the software system in actual environment (usually in drawings).Describes how the software system forms a functional entity with other external entities (usually in drawings).首先描述本软件系统在实际环境的组网方
9、式(一般用图描述)描述系统如何与外部实体一道组成功能实体(一般用图描述)This section describes relationships between the software system to be developed and external entities. Architecture Diagram, Top level DFD (Data-Flow-Diagram) or transaction diagrams can be used to describe architecture and interaction.本节还要描述待开发软件系统与外部实体的关系.,可以使用
10、系统架构图、顶层数据流图、事务图等来描述系统结构和交互关系。All external entities of the software system (defined in Procedure of Design Specification) that interact with the software system, or affect the software system in a certain mode, for example, OS, driver, hardware, interrupt or other software systems.The property (such
11、 as message, library invoking) and type (such as OS service, communication service, system tools, etc.) of the interaction between external entities and this system. Only the contents that are helpful in the software design should be included while describing the features of an external entity. Inst
12、ead of a complete description in this specification, you can make indexes to refer to the relative documents that describe the software design. For example, an index can be made for the programming guidance of the OS.所有系统外围实体(在设计规格流程中有定义),这些实体与软件系统发生交互作用或以某种方式影响软件系统,比如,操作系统,驱动程序,硬件,中断,其它软件系统等.外围实体和本
13、系统相互作用的性质(比如,消息,库调用)和类型(比如,OS服务,通信服务,系统工具等)。描述外部实体的特性时要注意该描述一定要有助本软件的设计和描述。 为了本文档内容的完整性,可以采用对于描述相关设计实体文档索引的方式:如对于操作系统编程手册的索引2.1.2 Design Considerations (Optional)设计思路(可选)2.1.2.1 Design Methodology 设计方法Describe design methodology that shall be used in the software system design.描述本软件系统所采取的设计方法。2.1.2.
14、2 Design Alternatives 设计可选方案 Analysis several alternatives of system design scheme, and specify the scheme that shall be used. 对本软件系统的几种设计方案进行分析、比较,并确定所采用的方案2.1.2.3 Design Constraints 设计约束1 Standards compliance 遵循标准Describe standards that software system shall comply with.描述本软件所遵循的标准、规范2 Hardware Li
15、mitations 硬件限制Describe hardware limitations of the software system.描述本软件系统实现的硬件限制3 Technology Limitations 技术限制Describe technology limitations of the software system.描述本软件的技术限制2.1.2.4 Other Design Considerations 其它Describe other design considerations of the software system.描述其它有关的设计考虑2.2 Level 1 Desi
16、gn Description第一层设计描述Architecture of the software system shall be described here. 这里要描述软件系统的总体结构。Structure chart, Hierarchical decomposition diagram, natural language can be used to represent the architecture.总体结构描述可以使用结构图,层次分解图,自然语言。2.2.1 Decomposition Description分解描述2.2.1.1 Module/Subsystem Decomp
17、osition模块/子系统分解This section describes subsystems ,module in the system.本节描述系统中的子系统和模块。1 Module/Subsystem 1 Description模块/子系统1描述Describe as follows 按照以下格式描述:Identification 标识:Type 类型:Purpose目的:Functions 功能列表:Requirement IDs to implement 要实现的需求ID:Submodules: 子模块:If this module will be further decompos
18、ed into submodules, list all submodules here. 如果本模块还要继续划分,列出下属子模块2 Module/Subsystem 2 Description模块/子系统2描述2.2.1.2 Concurrent Process Decomposition并发进程处理分解This section describes concurrent processes in the system.本节描述系统中的并发进程。In case of external entities, Subordinates attribute need not be described.
19、 对于外部实体,从属属性不必描述。1 Process 1 Description进程1描述Describe as follows 按照以下格式描述:Identification 标识:Type 类型:Purpose目的:Functions 功能列表:This part describes the functions to be performed in the process. If the function has been described in module decomposition before, description should be made on what functio
20、ns of the modules are implemented in this process.描述本进程中要完成的功能,如功能已经在前面的模块分解中有描述,则重点描述本进程完成了哪些模块的哪些功能。2 Process 2 Description进程2描述2.2.1.3 Data Decomposition数据分解This section describes data stores in the system.本节描述系统中的数据结构。External data entities shall not be described.外部数据实体不必描述。Describes the global
21、data structure of the system, including: the data directly accessed by decomposed modules, and the data structure used in interface of decomposed modules. When describing the data, make sure the data is the global data of the level.本章节描述本系统中用到的全局数据结构,其中至少包括: 各分解模块直接访问的数据,被各分解模块用来在接口中使用的结构。描述数据时要注意该数
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 华为 软件 概要 设计 模板
1、咨信平台为文档C2C交易模式,即用户上传的文档直接被用户下载,收益归上传人(含作者)所有;本站仅是提供信息存储空间和展示预览,仅对用户上传内容的表现方式做保护处理,对上载内容不做任何修改或编辑。所展示的作品文档包括内容和图片全部来源于网络用户和作者上传投稿,我们不确定上传用户享有完全著作权,根据《信息网络传播权保护条例》,如果侵犯了您的版权、权益或隐私,请联系我们,核实后会尽快下架及时删除,并可随时和客服了解处理情况,尊重保护知识产权我们共同努力。
2、文档的总页数、文档格式和文档大小以系统显示为准(内容中显示的页数不一定正确),网站客服只以系统显示的页数、文件格式、文档大小作为仲裁依据,平台无法对文档的真实性、完整性、权威性、准确性、专业性及其观点立场做任何保证或承诺,下载前须认真查看,确认无误后再购买,务必慎重购买;若有违法违纪将进行移交司法处理,若涉侵权平台将进行基本处罚并下架。
3、本站所有内容均由用户上传,付费前请自行鉴别,如您付费,意味着您已接受本站规则且自行承担风险,本站不进行额外附加服务,虚拟产品一经售出概不退款(未进行购买下载可退充值款),文档一经付费(服务费)、不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
4、如你看到网页展示的文档有www.zixin.com.cn水印,是因预览和防盗链等技术需要对页面进行转换压缩成图而已,我们并不对上传的文档进行任何编辑或修改,文档下载后都不会有水印标识(原文档上传前个别存留的除外),下载后原文更清晰;试题试卷类文档,如果标题没有明确说明有答案则都视为没有答案,请知晓;PPT和DOC文档可被视为“模板”,允许上传人保留章节、目录结构的情况下删减部份的内容;PDF文档不管是原文档转换或图片扫描而得,本站不作要求视为允许,下载前自行私信或留言给上传者【精****】。
5、本文档所展示的图片、画像、字体、音乐的版权可能需版权方额外授权,请谨慎使用;网站提供的党政主题相关内容(国旗、国徽、党徽--等)目的在于配合国家政策宣传,仅限个人学习分享使用,禁止用于任何广告和商用目的。
6、文档遇到问题,请及时私信或留言给本站上传会员【精****】,需本站解决可联系【 微信客服】、【 QQ客服】,若有其他问题请点击或扫码反馈【 服务填表】;文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“【 版权申诉】”(推荐),意见反馈和侵权处理邮箱:1219186828@qq.com;也可以拔打客服电话:4008-655-100;投诉/维权电话:4009-655-100。