欣锐(HS系列)电源IC资料HS210-4N01电源.ppt

单击此处编辑母版标题样式,单击此处编辑母版文本样式,第二级,第三级,第四级,第五级,*,*,*,欣锐（,HS,系列）电源,IC,资料,HS210-4N01,电源：,待机电压主要形成,ICNPC1014,脚位,脚位标注,功能,阻值（,200K,档）,待机电压（,V,）,开机电压（,V,）,1,VCC,VCC,供电,86.8,8.66,8.26,2,地,空脚接地,0,0,0,3,地,空脚接地,0,0,0,4,FB,FB,反馈信号接入,无穷,0.32,0.6,5,DRAIN,300V,供电，连接内部,MOS,管,D,极,0,308,303,7,地,空脚接地,0,0,0,8,地,地,0,0,0,脚位,脚位标注,功能,阻值（,200K,档）,待机电压（,V,）,开机电压（,V,）,1,VSENSE,电压放大器的反向输入,17.6,1.99,2.5,2,VAOUT,电压放大器输出,无穷,0.41,2,3,MULTIN,电压输入和内接乘法器,20,1.71,1.65,4,ISENSE,过流检测输入,1,0,0.01,5,DETIN,零电流检测输入,51.1,0,0.6,6,地,地,0,0,0,7,GTDRV,PFC,驱动脉冲输出,无穷,0.13,0.46,8,VCC,供电端,无穷,1.24,13.01,PFC,电压形成电路,-TDA4863,24V/12V,电压形成电路,NCP1395(,谐振模块）,+NCP5181(,高压驱动模块,）,脚位,脚位标注,功能,阻值（,200K,档）,待机电压（,V,）,开机电压（,V,）,1,Fmin,外接定时电阻,100.4,0.01,20.5,2,Fmax,外接频率电阻,0,测量会保护,3,DT,死区时间控制电阻,0,测量会保护,4,Css,软启动电容,0.7,3.62,5,FB,反馈输入,3,0.03,4.84,6,Ctimer,时间延迟,150.6,0,0.04,7,Bo,低压检测输入,11.9,0.85,1.38,8,Agnd,模拟地,0,0,0,9,Pgnd,电源地,0,0,0,10,ALo,地段脉冲输出,112.8,0.03,5.28,11,BHo,高端脉冲输出,113.7,0.03,5.27,12,Vcc,电源供电,1.25,13.07,13,Fast Fault,快速检测引脚,0.6,0,0.01,14,Slow Fault,延迟检测引脚,3.5,0,0.1,15,AMPout,运放输出，内接跨导放大器,14.9,0,0,16,NINVN,运放同相输入端,8.2,0,0.25,NCP5181,脚位,脚位标注,功能,阻值（,200K,档）,待机电压（,V,）,开机电压（,V,）,1,IN_HI,H,脉冲输入,0.03,5.27,2,IN_LO,L,脉冲输入,112.8,0.03,5.28,3,GND,地,0,0,0,4,DRV_L,L,端栅极脉冲输出,4.6,0,5.29,5,VCC,供电端,1025,13.07,6,Bridge,H,端反馈输入,0.96,196.9,7,DRV_H,H,端栅极脉冲输出,0.97,测会烧,IC,8,V_Boot,自举供电端,1.16,209,