齿轮系统动力学刚体模型.pptx
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 齿轮 系统 动力学 刚体 模型
- 资源描述:
-
单击此处编辑母版标题样式,单击此处编辑母版文本样式,第二级,第三级,第四级,第五级,2021/3/4,#,齿轮系统动力学刚体模型,齿轮动力学模型建立,葛银明,1.齿轮模型发展,From the 1920s to 1930s of the last century,a primary goal of engineers is to analyze the engaging dynamic problems in order to quantify the entity of teeth loadings by means of both analytical and experimental methodologies.,From the 1950s,very simplied lumped parameters systems(as mass-spring systems)have been set up to study dynamic effects on gears,becoming more and more sophisticated.,During the 1970s and 1980s,lumped parameters models may include complex effects as the tridimensional stiffness of teeth,nonlinearities of the system,damping and friction parameters.,1.齿轮模型发展,Nowadays,reference models available take the peculiarity into account global dynamic phenomena as torsion,exural and axial vibrations,allowing to obtain both transitory and operating responses,also if different typologies of engaging errors are considered.,Aim of the present work is to set up a combined multibody/FEM numerical technique,on the basis of a commercial code,in order to simulate the engaging phenomenon in aerospace gears,whose peculiarity is a high exibility of the body gear with respect teeth ring,The last one is probably the best way to analyze the gear dynamics,but the computational effort required is very high,so in the present paper,the RFLEX approachs implemented.All the exibility features of bodies are derived using FE approach.,Full Rigid Model(FRM),(,1,),the RecurdynToolkit Gear,(,2,),the stiffness value of the teeth is computed using an analytical approach based on the Hertzian formulation or FEA,2.1,直齿轮刚体动力学模型,斜齿轮斜齿轮弯一扭一轴祸合分析模型,Full Flexible Model(FFM),(2)the stiffness value of the teeth is computed using an analytical approach based on the Hertzian formulation or FEA,The exibility of the gears is computed by means of a reduced FE model.,齿轮系统动力学刚体模型,常见的数值求解方法:逐步积分法(Newmark法,Wilson,中央差分法)和精细积分法,2 斜齿轮动力学模型,Flexibility of bodies could be considered in two different ways,using the modal superposition(RFLEX,reduced exibility model)or considering the overall body exibility by means of the discretized mass and stiffness matrices of the body(FFLEX,full exibility model).,阻尼C=0及激励P=0时进行模态分析,From the 1920s to 1930s of the last century,a primary goal of engineers is to analyze the engaging dynamic problems in order to quantify the entity of teeth loadings by means of both analytical and experimental methodologies.,During the 1970s and 1980s,lumped parameters models may include complex effects as the tridimensional stiffness of teeth,nonlinearities of the system,damping and friction parameters.,From the 1920s to 1930s of the last century,a primary goal of engineers is to analyze the engaging dynamic problems in order to quantify the entity of teeth loadings by means of both analytical and experimental methodologies.,斜齿轮斜齿轮弯一扭一轴祸合分析模型,The last one is probably the best way to analyze the gear dynamics,but the computational effort required is very high,so in the present paper,the RFLEX approachs implemented.,斜齿轮斜齿轮弯一扭一轴祸合分析模型,Flex Teeth Model(FTM),(,1,),a Bushing Force element sets the stiffness values of the three torsional springs that link the tooth.,(,2,),the QFBGeartool of Recurdyn,(,3,),the tooth compliance parameter in the,Bushing Forces,is computed imposing a torque to a gear sector and measuring the deection of each tooth,2.1,直齿轮刚体动力学模型,斜齿轮斜齿轮弯一扭一轴祸合分析模型,2.2,斜齿轮动力学模型,2.2,斜齿轮动力学模型,(,1,)模态分析,阻尼,C=0,及激励,P=0,时进行模态分析,(,2,)响应求解方法,结构复杂,解析方法求解困难,多用数值方法求解。,常见的数值求解方法:逐步积分法(,Newmark,法,,Wilson,,中央差分法)和精细积分法,2.2,斜齿轮动力学模型,The last one is probably the best way to analyze the gear dynamics,but the computational effort required is very high,so in the present paper,the RFLEX approachs implemented.,During the 1970s and 1980s,lumped parameters models may include complex effects as the tridimensional stiffness of teeth,nonlinearities of the system,damping and friction parameters.,1 直齿轮刚体动力学模型,(1)the RecurdynToolkit Gear,(2)the stiffness value of the teeth is computed using an analytical approach based on the Hertzian formulation or FEA,(1)a Bushing Force element sets the stiffness values of the three torsional springs that link the tooth.,(1)the RecurdynToolkit Gear,齿轮系统动力学刚体模型,From the 1920s to 1930s of the last century,a primary goal of engineers is to analyze the engaging dynamic problems in order to quantify the entity of teeth loadings by means of both analytical and experimental methodologies.,The exibility of the gears is computed by means of a reduced FE model.,3 圆锥齿轮动力学模型,During the 1970s and 1980s,lumped parameters models may include complex effects as the tridimensional stiffness of teeth,nonlinearities of the system,damping and friction parameters.,齿轮系统动力学刚体模型,斜齿轮斜齿轮弯一扭一轴祸合分析模型,Aim of the present work is to set up a combined multibody/FEM numerical technique,on the basis of a commercial code,in order to simulate the engaging phenomenon in aerospace gears,whose peculiarity is a high exibility of the body gear with respect teeth ring,Full Flexible Model(FFM),Flexibility of bodies could be considered in two different ways,using the modal superposition(RFLEX,reduced exibility model)or considering the overall body exibility by means of the discretized mass and stiffness matrices of the body(FFLEX,full exibility model).,2.3,圆锥齿轮动力学模型,2.3,圆锥齿轮动力学模型,3.,齿轮柔体动力学,The conventional nite element analyses require a prohibitively rened mesh to address these problems when one seeks dynamic response.,The semi-analytical nite element analyses,Contact parameters,solved by,using the analytical method,,,and,substituted,into the FEM,Flexibility of bodies could be considered in two different ways,using the modal superposition(RFLEX,reduced exibility model)or considering the overall body exibility by means of the discretized mass and stiffness matrices of the body(FFLEX,full exibility model).,Full Flexible Model(FFM),The exibility of the gears is computed by means of a reduced FE model.,(,reduced stiffness and mass matrices compute modal properties and mode shapes a metale-Recurdyn,),3.,齿轮柔体动力学,展开阅读全文

咨信网声明:本文档由用户上传并分享,仅供学习交流、研究之用,未经授权,严禁复制、发行、汇编、翻译或网络传播等,侵权必究。
咨信网小贴示:
1、浏览或下载可查看了解,请点击【咨信网告知】。
2、下载文件中如有侵权或不适当内容,将立即纠正。
3、如果因为网速或其他原因下载失败请重新下载,重复下载[60天内]不扣币。
4、开具发票登录电脑端申请,请点击【索取发票】。
咨信网客服组:【微信客服】
1、浏览或下载可查看了解,请点击【咨信网告知】。
2、下载文件中如有侵权或不适当内容,将立即纠正。
3、如果因为网速或其他原因下载失败请重新下载,重复下载[60天内]不扣币。
4、开具发票登录电脑端申请,请点击【索取发票】。
咨信网客服组:【微信客服】


齿轮系统动力学刚体模型.pptx
















自信AI助手














微信客服
客服QQ
发送邮件
意见反馈



链接地址:https://www.zixin.com.cn/doc/14500585.html