应答器和LEU培训.ppt

,Mastertitelformat bearbeiten,Mastertextformat bearbeiten,Zweite Ebene,Dritte Ebene,Vierte Ebene,Fnfte Ebene,Page,*,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,Siemens 2011.,All rights reserved.,应答器和LEU培训,签字页,Signature Sheet,2,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,总览,Overview of Changes,3,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,Summary,摘要,System Overview,系统一览,On board,车载,Antenna,天线,Balise,应答器,LEU-MT,(LineSide Electronic Unit),轨旁电子单元,Programming Tools,编程工具,TPG-Eurobalise,LEU-MT TPG,Programming of:,编程,Fix Data Balises and,Variable Data Balises,固定应答器和可变应答器,LEU-MT,轨旁电子单元,4,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,System overview,系统一览,Distant Signal,预告信号,Variable,data balise,可变应答器,LEU-MT,TCC,HMI,Balise-Antenna,应答器,-,天线,Radar,雷达,Odometer,Pulse,Generator,里程表脉冲发生器,Fix,Data Balise,固定应答器,ITC=Intermittent Train Control,点式列车控制模式,5,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,Train Borne Components Trainguard,Trainguard,车载组件,Functions On-board Unit,TCC,车载单元功能,calculates braking curves and speed profiles,计算制动曲线和速度曲线,controls permitted speed,控制允许速度,receives data telegrams from Balises,接收应答器数据,includes vehicle specific data and line specific track data base,包括列车数据和线路数据,knows b,raking properties of the train,了解列车制动特性,controls emergency brake,控制紧急制动,6,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,Train Borne Components Trainguard Trainguard,车载组件,Balise Antenna,应答器天线,permanently radiates an activation signal with 27 MHz,持续发射,27M,赫兹的激活信号,activates Balise S21 via inductive coupling,通过感应耦合激活,S21,应答器,receives intermittent data transmission from Balise S21,从,S21,应答器接受间断的数据,ATTENTION,注意,:,Radio Emission,stay away with pacemaker under the train!,无线辐射,带起博器人员远离,7,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,Track Elements,轨旁元件,Balise S21,Variable Data Balise,可变数据应答器,Fix Data Balise,固定应答器,Outdoor LEU-MT,室外,LEU,MT,Position reference mark,位置参考点,8,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,TPG-Eurobalise Test and Program Device Eurobalise,测试和编程设备,Eurobalise,9,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,Battery,电池,Powering TPG-EurobaliseTPG-Eurobalise,充电,PSION,10,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,Outdoor/Indoor use,室外,/,室内 应用,11,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,Programming is safety relevant,编程是安全相关行为,Programming is safety relevant,编程是与安全相关的,Balise contains locating information,应答器包含位置信息,A mis-localized train may cause an serious accident,列车失位可能会导致严重的事故,E.g.:Balise informs train that train is 200m before track end,例如：应答器告诉列车距离轨道尽头为,200m,But balise programming is incorrect and tells him 300m,如果应答器的程序告诉列车距离为,300m,就是不正确的,=Train may stop 100m too late,那么列车停在,100m,处就太迟了,=Balise data is therefore safety relevant,因此应答器数据是安全相关的,Only personnal that is trained may operate the TPG-Eurobalise!,只有经过培训的人才能操作应答器的测试编程,Independent persons has to verify programming,还应有专人来验证编程内容,Important:,重点,Correct program file(name+version),正确的程序文件（名称和版本）,Correct labeling,正确的标记,Correct installing at the right point in the track,正确的安装在轨道的正确位置,12,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,Fix Data Balise Programming Steps,固定应答器编程步骤,Program balise,应答器编程,Check labeling of Balise,检查标记,Labeling of balise,标记应答器,Install on track,安装,Display MD4,label and position of balise,显示,MD4,，应答器标签和位置,Note second half of MD4 checksum for further checking.,记录,MD4,校验码第,2,部分,备验证之用,Programmer and verifier shall be two different persons.,编程和验证必须由两个人完成,Check emission level,检查发射等级,Read back whole telegram for complete tlg check in office on other PC.,回读全部报文,以便在办公室电脑上做完整检查，,Verifier:,Comparision of second part of MD4 noted in protocol with MD4,Compare tlg bit-per-bit.,验证,:,逐位将,MD4,的第二部分与记录作比较,13,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,PSION Balise program:Menus,应答器编程器菜单,Program.tlg-File,编程,tlg-filw,Display MD4 checksum to fill out protocol,显示,MD4,校验码以作记录,Safety double check of telegram,stored on disk,to be compared by Verifier.,重复检查报文并保存在磁盘上,供验证者比较,.,Signal level Check of balise emission,应答器发射信号级检查,14,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,MD4 Checksum for balises and Protocol Type 1,应答器,MD4,校验和协议类型,1,MD4 checksum displayed on PSION is,16 characters for a balise.,显示在,PSION,上的应答器,MD4,校验码含,16,个字符,Note and check first half of checksum with protocol of Type 1,记录并根据类型,1,的记录检查校验码的前半部,Note second half of checksum for independent checking at Siemens.,记录第,2,部分校验码,以便西门子另外人员检查,3 tries maximum allowed.If not ok after 3rd try,discard balise.,最多,3,次尝试，如果仍不成功，就放弃,Note checksum of every programmation,even if MD4 not corresponding.,记录每次编程校验码，即使,MD4,不匹配,15,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,Checks in the track with balises,轨道检查应答器,Checks in the track on balises,轨道检查应答器,Note and check first half of checksum with protocol of Type 1,记录并根据类型,1,的记录检查校验码的前半部,Note second half of checksum for independent checking at Siemens.,记录第,2,部分校验码,并由西门子另外人员检查,Check label information on balise,检查应答器上标签信息,Check balise name and km-point in the track,检查应答器名和轨道公里标,FB1006,888 1001-0,NID_C NID_BG PIG,FB=Fix Data Balise,固定应答器,(Name in Track Layout),Filename,文件名,(B_88801001-0.tlg),Second part of MD4 is known by Verifier in Telegram Type 2 and compared.,验证的人了解报文类型,2,的第二部分并做比较。,16,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,Load telegrams on PSIONPSION,上加载报文,folder for telegramms,报文的文件夹,17,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,Balise programming with PSION 1/2,用,PSION,进行应答器编程,1/2,18,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,Balise programming with PSION 2/2,用,PSION,进行应答器编程,2/2,19,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,Balise checking with PSION 1/3:MD4 check,用,PSION,进行应答器检查,1/3:MD4,检查,Say yes if first 8 characters of MD4 are identical.Note all 16 characters of MD4 in protocol.,如果,MD4,的前,8,个字符相符，确认“是”。记录下,MD4,的全部,16,个字符,20,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,Balise checking with PSION 3/3:Level check,用,PSION,进行应答器检查,3/3:,等级检查,21,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,Balise filenames,应答器文件名,B_88801501-0.tlg,Station 15,站,15,Tool balise name 88801513-0,工具应答器名称,88801513-0,customer name with cross reference list,FB1502,交叉引用表顾客名,FB1502,22,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,LEU-MT=Lineside Electronic Unit(Mass Transit)LEU-MT=,轨旁电子单元（城轨）,LEU,Interfaces variable data balise and Signal with Interlocking,是联锁与可变数据应答器和信号机的接口,Sends telegram depending on signal aspect with cable into variable data balise,for example:,根据信号机显示通过线缆将报文发送至可变应答器。例如：,Green=Move,绿色行车,Red=Stop,红色停车,Fix data balise,固定应答器,Variable data balise,可变应答器,Inter-locking,联锁,Fix data balise,固定应答器,Location information,位置信息,23,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,LEU-MT,24,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,LEU-MT,P1:power,电源,P2:balise connection,应答器连接,P3:in/out interface,输入输出接口,P4:PROSIG interface,PROSIG,接口,P5:TPG interface,TPG,接口,25,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,LEU-MT,Tesa,real Prosig and Tesa with cable rack,带线架的实物,P,rosig,和,Tesa,Prosig,26,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,LEU-MT Indoor Cabinet,Up to 12 LEU-MT,can be located in a,LEU-MT indoor cabinet,在,1,个,LEU-MT,室内柜中最多可放置,12,个,LEU-MT,27,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,LEU-MT,Photo of the LEU-MT indoor cabinet LEU-MT,室内柜现场照片,Filter modules for LEU-MT TPG test adapters are indicated with white numbers 1 2 3,白色数字,1 2 3,显示的是,LEU-MT TPG,测试适配器的过滤模块,123,123,28,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,LEU-MT TPG,LEU-MT TPG and accessories,LEU-MT TPG,及其附件,29,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,Load telegrams on PSION,在,PSION,上加载报文,Connect Psion and PC via docking station and USB cable and load TXT files to folder DATA,通过,docking station,和,USB,线连接,Psion,和,PC,，并将,TXT,文件载入至文件夹,DATA,folder for telegramms,报文文件夹,30,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,LEU-MT TPG,LEU-MT TPG,31,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,LEU-MT TPG,TPG can be connected to the mains using the AC power pack for programming/charging,TPG,可连接,AC,电源屏进行编程,/,充电,-TPG can program with,battery for approx.8 hours(20,C),TPG,使用电池编程可维持大约,8,小时,(20,C),LEU-MT interfaces LEU-MT,接口,32,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,LEU-MT TPG,Bluetooth Communication,蓝牙连接,please check bluetooth connection between TPG and handheld,请检查,TPG,与手持终端间的蓝牙连接,33,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,LEU-MT TPG,Menu,菜单,34,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,LEU-MT TPG,Power Supply of Tesa Board,Tesa,板的电源供应,Tesa board can be supplied with power by the TPG,Tesa,板可由,TPG,供电,(necessary if the Tesa board is not supplied with power by the line/,power supply can be enabled via the Tesa Diagnosis dialogue),（当,T,esa,板不通过外接电源供电时需要,/,供电可通过,“Tesa Diagnosis”,启用）,Proceed as follows to enable the power supply of the Tesa:,Tesa,供电启用过程如下：,-Open the“Tesa Diagnosis”dialogue.,打开,“Tesa Diagnosis”,对话框,-Select“Tesa Power On”.,选择,“Tesa Power On”.,(The message Tesa Power switched on is displayed),（会显示,“Tesa Power switched on”,信息）,Open the“Tesa Diagnosis”dialogue,打开,“Tesa Diagnosis”dialogue,35,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,LEU-MT TPG,Preconditions for Testing and,Programming of Tesa Boards,测试和编程,Tesa,板的先决条件,Disconnect the 4-pole output cable from the Tesa board,从,Tesa,板上断开,4,芯,(,柱,),输出线,2)Connect the TPG to the Tesa board using the cable,使用电缆连接,TPG,与,Tesa,板,3)Make sure that the TPG is switched on,确保,TPG,开着,4)Make sure that the handheld PSION Workabout Pro terminal is switched on,确保手持终端,PSION,开着,5)Make sure that Bluetooth communication is enabled,确保蓝牙连接启用,Caution,注意,Please refer to the safety instructions in the maintenance manual,请按照维护手册中的安全指令操作,36,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,LEU-MT/Balise Programming Steps:Safety relevant data!LEU-MT/,应答器编程步骤：安全相关数据,Program balise+MD4 check,给应答器编程,+MD4,检查,Check labeling of Balise,检查标记,Labeling of balise,标记,Install on track,安装,Check MD4 with label and position of balise,检查应答器标签和位置,Note second half of MD4,记录,MD4,的第二部分,Programmer and verifier shall be two different persons.,编程和核验必须由两个人完成,Program LEU-MT,编程,LEU-MT,Check MD4 for every signal aspect.,检查各种信号的,MD4,Check first half,note second half.,检查第一部分，记录第二部分,Check MD4 of LEU-MT code,检查,LEU-MT MD4,编码,Default telegram:,缺省报文,Handheld TPG,Signal aspect data:,信号显示数据,LEU-MT TPG LEU-MT,Connect LEU-MT to variable data balise,连接,LEU-MT,与可变应答器,IXL:Show all signal aspects:,显示所有信号,Red,RedYellow,Green,Yellow,Dark,ERR.,红色，红黄色，绿色，黄色，黑色，报错。,Signal aspect,file,connection check:,信号显示，文件，连接检查,PSION TPG,Check emission level,检查发射等级,37,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,LEU-MT filenames,文件名,T_14_S1401_01.txt,Station 14,场站,14,Signal S1401,信号,S1401,Example only!,仅以此为例,38,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,LEU-MT TPG,Program the Tesa Tesa,编程,39,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,MD4 Checksum for LEU-MT and Protocol Type 1LEU-MT,和记录类型,1,的,MD4,校验码,MD4 Check MD4,检查,MD4 checksum displayed on PSION is 32 characters for LEU-MT,对于,LEU-MT,，显示在,PSION,上的,MD4,校验码有,32,位字符,Note and check first half of checksum with protocol of Type 1,使用记录类型,1,记录并检查校验码的第一部分,Note second half of checksum for independent checking at Siemens.,由,记录第二部分校验码给西门子另外人员检查,3 tries maximum allowed.If not ok after 3rd try,discard LEU-MT.,最多有三次尝试机会，如果在三次尝试之后仍不成功,放弃,40,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,Checks in the track with variable data balises,检查轨道上可变应答器,Variable balises contain default data(e.g.if LEU-MT cable is cut).,可变应答器包含默认数据,To check default telegram:,检查默认报文：,If the balise is very dusty please clean the balise,如果应答器布满灰尘，请清洁应答器,Disconnect LEU-MT,断开,LEU-MT,Check first half of checksum with protocol of Type 1,使用记录类型,1,检查第一部分的校验码,Note second half of checksum for independent checking at Siemens.,记录第二部分校验码给西门子另外一个人检查,Check label information on balise,检查应答器标签信息,Check balise name and km-point in the track,检查应答器名称和轨道公里标,VB1001,888 1001-1,NID_C NID_BG PIG,VB=Name of Variable Data Balise,可变应答器名称,Name in Track Layout,轨道分布图中的名称,Original filename for default telegram,原始默认报文文件名,(B_88801001-1.tlg),41,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,Checks in the track with variable data balises,检查轨道上可变应答器,Check signal aspects.,检查信号,For every signal aspect combination it shall be noted:,每个信号显示组合应记录,Check first half of checksum with protocol of Type 1,根据记录类型,1,检查第一部分校验码,Note second half of checksum for independent checking at Siemens.,记录第二部分校验码给西门子另外人员检查,To test the LEU-MT default telegram(Strtelegramm),produce incorrect current input,为测试,LEU-MT,默认报文,(,干扰报文,),，产生错误的电流,42,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,LEU-MT TPG,Allocation Test,分配测试,The allocation test checks the correct selection of data from the EEPROM on the basis of the data stream of the balise channels for all possible Prosig codes,分配测试是指在应答器通道的数据流的基础上,针对各种可能的,Prosig,编码,对从,EEPROM,中正确选择数据的检查,.,43,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,LEU-MT TPG,Test Connection,This button is used to start a connection test.This test checks whether the lamp circuits,which are used according to the opened file,are connected.The Prosig test can only be started if this test has been successful.After the connection test,the result is displayed by using the following colors:,green:test connector is required and connected,red:test connector is required and not connected,grey:test connector is not required,Start Prosig Test,This button is used to start the Prosig test.During this test,the different signal aspects are activated one after the other and it is checked if the expected Prosig code is generated.A status dialogue informs about progress,i.e.whether the test has been successful or not.,44,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,LEU-MT TPG,测试连接,这个按钮是用于开始连接测试。这个测试用于检查基于已打开文件使用的照明线路是否连接。只有当该测试成功后，,Pr,o,sig,测试才可开始。当连接测试后，其结果通过以下几种颜色表示：,绿色：需要测试连接器，且已连接,红色：需要测试连接器，未连接,灰色：不需要测试连接器,开始,Prosig,测试,这个按钮用于开始,Prosig,测试。在测试过程中，不同的信号显示会依次激活，如果预期的,Prosig,编码产生，则检查成功。一个状态对话框会提供进程状态，即该测试成功与否。,45,NanJing Rail Transit Line 3 Signalling System Balise and LEU Maintenance,LEU-MT TPG,Password,Password Protection during Program Sta