BS ISO 16750-2-2010 道路车辆.电气和电子设备的环境条件和试验.第2部分电力负载.pdf
《BS ISO 16750-2-2010 道路车辆.电气和电子设备的环境条件和试验.第2部分电力负载.pdf》由会员分享,可在线阅读,更多相关《BS ISO 16750-2-2010 道路车辆.电气和电子设备的环境条件和试验.第2部分电力负载.pdf(28页珍藏版)》请在咨信网上搜索。
1、BS ISO 16750-2:2010 ICS 43.040.10 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BRITISH STANDARD Road vehicles Environmental conditions and testing for electrical and electronic equipment Part 2: Electrical loads This British Standard was published under the authority of the
2、 Standards Policy and Strategy Committee on 31 March 2010 BSI 2010 ISBN 978 0 580 60871 1 Amendments/corrigenda issued since publication DateComments BS ISO 16750-2:2010 National foreword This British Standard is the UK implementation of ISO 16750-2:2010. It supersedes BS ISO 16750-2:2006 which is w
3、ithdrawn. The UK participation in its preparation was entrusted to Technical Committee AUE/16, Electrical and electronic equipment. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provis
4、ions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. 标准分享网 w w w .b z f x w .c o m 免费下载 BS ISO 16750-2:2010 Reference number ISO 16750-2:2010(E) ISO 2010 INTERNATIONAL STANDARD ISO 16750-2 Third editi
5、on 2010-03-15 Road vehicles Environmental conditions and testing for electrical and electronic equipment Part 2: Electrical loads Vhicules routiers Spcifications denvironnement et essais de lquipement lectrique et lectronique Partie 2: Contraintes lectriques BS ISO 16750-2:2010 ISO 16750-2:2010(E) P
6、DF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, p
7、arties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relati
8、ve to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIG
9、HT PROTECTED DOCUMENT ISO 2010 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
10、 ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO 2010 All rights reserved 标准分享网 w w w .b z f x w .c o m 免费下载 w w w . b z f x w
11、 . c o m BS ISO 16750-2:2010 ISO 16750-2:2010(E) ISO 2010 All rights reserved iii Contents Page Foreword .iv 1 Scope.1 2 Normative references.1 3 Terms and definitions.1 4 Tests and requirements.1 4.1 General .1 4.2 Direct current supply voltage.2 4.3 Overvoltage.3 4.4 Superimposed alternating volta
12、ge .4 4.5 Slow decrease and increase of supply voltage.6 4.6 Discontinuities in supply voltage.6 4.7 Reversed voltage.14 4.8 Ground reference and supply offset .15 4.9 Open circuit tests .15 4.10 Short circuit protection.16 4.11 Withstand voltage.17 4.12 Insulation resistance.18 4.13 Electromagnetic
13、 compatibility .18 5 Documentation .18 Bibliography.19 w w w . b z f x w . c o m BS ISO 16750-2:2010 ISO 16750-2:2010(E) iv ISO 2010 All rights reserved Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The w
14、ork of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-govern
15、mental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The
16、 main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
17、 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 16750-2 was prepared by Technical Committee ISO/TC 22, Road vehicles, Subcommittee SC 3, Electri
18、cal and electronic equipment. This third edition cancels and replaces the second edition (ISO 16750-2:2006), which has been technically revised. ISO 16750 consists of the following parts, under the general title Road vehicles Environmental conditions and testing for electrical and electronic equipme
19、nt: Part 1: General Part 2: Electrical loads Part 3: Mechanical loads Part 4: Climatic loads Part 5: Chemical loads 标准分享网 w w w .b z f x w .c o m 免费下载 w w w . b z f x w . c o m BS ISO 16750-2:2010 INTERNATIONAL STANDARD ISO 16750-2:2010(E) ISO 2010 All rights reserved 1 Road vehicles Environmental c
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BS ISO 16750-2-2010 道路车辆.电气和电子设备的环境条件和试验.第2部分电力负载 16750 2010 道路 车辆 电气 电子设备 环境 条件 试验 部分 电力 负载
1、咨信平台为文档C2C交易模式,即用户上传的文档直接被用户下载,收益归上传人(含作者)所有;本站仅是提供信息存储空间和展示预览,仅对用户上传内容的表现方式做保护处理,对上载内容不做任何修改或编辑。所展示的作品文档包括内容和图片全部来源于网络用户和作者上传投稿,我们不确定上传用户享有完全著作权,根据《信息网络传播权保护条例》,如果侵犯了您的版权、权益或隐私,请联系我们,核实后会尽快下架及时删除,并可随时和客服了解处理情况,尊重保护知识产权我们共同努力。
2、文档的总页数、文档格式和文档大小以系统显示为准(内容中显示的页数不一定正确),网站客服只以系统显示的页数、文件格式、文档大小作为仲裁依据,平台无法对文档的真实性、完整性、权威性、准确性、专业性及其观点立场做任何保证或承诺,下载前须认真查看,确认无误后再购买,务必慎重购买;若有违法违纪将进行移交司法处理,若涉侵权平台将进行基本处罚并下架。
3、本站所有内容均由用户上传,付费前请自行鉴别,如您付费,意味着您已接受本站规则且自行承担风险,本站不进行额外附加服务,虚拟产品一经售出概不退款(未进行购买下载可退充值款),文档一经付费(服务费)、不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
4、如你看到网页展示的文档有www.zixin.com.cn水印,是因预览和防盗链等技术需要对页面进行转换压缩成图而已,我们并不对上传的文档进行任何编辑或修改,文档下载后都不会有水印标识(原文档上传前个别存留的除外),下载后原文更清晰;试题试卷类文档,如果标题没有明确说明有答案则都视为没有答案,请知晓;PPT和DOC文档可被视为“模板”,允许上传人保留章节、目录结构的情况下删减部份的内容;PDF文档不管是原文档转换或图片扫描而得,本站不作要求视为允许,下载前自行私信或留言给上传者【ne****t】。
5、本文档所展示的图片、画像、字体、音乐的版权可能需版权方额外授权,请谨慎使用;网站提供的党政主题相关内容(国旗、国徽、党徽--等)目的在于配合国家政策宣传,仅限个人学习分享使用,禁止用于任何广告和商用目的。
6、文档遇到问题,请及时私信或留言给本站上传会员【ne****t】,需本站解决可联系【 微信客服】、【 QQ客服】,若有其他问题请点击或扫码反馈【 服务填表】;文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“【 版权申诉】”(推荐),意见反馈和侵权处理邮箱:1219186828@qq.com;也可以拔打客服电话:4008-655-100;投诉/维权电话:4009-655-100。
链接地址:https://www.zixin.com.cn/doc/37543.html